It’s both easy and essential to care for your wooden utensils. Wooden spoon care involves similar practices to maintaining wooden cutting board care. After using a wooden utensil, just use a stainless steel soft scrubber pad, soap and warm water.
Although some people prefer plastic cutting boards because they can be put in the dishwasher, I've always loved large wooden chopping blocks. Perhaps it's because I have fond memories of my father chopping on his custom-made wood cutting board, but there's something that's rustic and cool about old-school boards. Since I'm the proud owner of a giant (and incredibly heavy) new wooden cutting board, I figure it's high time I learned the proper technique for cleaning it. To find out the dos and don'ts of wooden cutting board care, keep on reading.
Unless you like deep scratches, I strongly recommend not using serrated knives on your Workingwoods board (or any other wooden cutting board you care about). Although deep scratches like those made by serrated knives can be removed with sandpaper, I'm sure you have better things to do with your time, so it's easiest to simply avoid the deep scratches in the first place.
Although it's a paradox, the two biggest enemies of a cutting board are moisture and dryness. If the board soaks up too much moisture, it could swell and warp. If it gets too dried out, it could crack. You can prevent both situations from occurring by keeping the board lightly oiled, and drying it immediately after washing it. You should also never allow the board to soak in water.
Also keep in mind the oil finish not only protects the board from moisture and from drying out, but it helps prevent food-borne bacteria from penetrating the wood fibers.
Over time, and with repeated washings, your cutting board might lose some of its luster and smoothness. You can bring it back to brand-new shape quickly by lightly sanding it with 220 grit sandpaper, wiping it clean, then re-oiling it with mineral oil. Plus, you get the pleasure of feeling the wood in the cutting board respond to your touch as it is restored before your eyes.
Even scratches and knife
marks can be removed by sanding the board...it just takes a bit longer. For
a super-smooth finish, use 400 grit sandpaper (after using the 220 grit)
before oiling. I like to spread the mineral oil pretty thickly on both
sides, let it soak for 5 to 10 minutes, then wipe the board "dry" with paper